If your company has a measuring device and wants to see if it's performing accurately or not, you can send it off to a metrology lab for in-depth measurement testing. Then you'll know if calibration is a requirement or not. As long as you use these tips, working with one of these labs won't prove challenging.
Make Sure Temperature and Humidity Remain the Same
In order to reveal meaningful results for measuring devices that are tested by one of these labs, both the temperature and humidity need to remain the same. If there were fluctuations at any point during testing, that's going to throw off your metrology lab results.
As such, it helps to verify these details with a metrology lab before using their services. Look at their testing environment and make sure it has a way to keep humidity and temperature levels the same so that confounds don't result later.
Decide Between On-Site and In-Lab Testing
When you work with a metrology lab, you have the ability to utilize on-site testing services or those that happen directly inside the lab. You want to determine the best testing path for your measuring device and operations that rely on it.
For instance, if you have a really large measuring device, it may be better to use on-site metrology testing services so that you don't have to deal with the logistics of moving this equipment. Whereas if you want to ensure the metrology lab has all of the tools and resources necessary to test your measuring equipment accurately, testing at the actual lab may be better.
Use the Same Company if Calibration is Required
If after metrology lab testing it's revealed that your measuring devices are off, you want to make sure the same testing company performs the necessary calibrations. Then there won't be a delay with calibration and it will take place in an impactful manner.
Since the metrology lab performed the initial assessments to find out how your measuring equipment was performing, they'll know exactly how this equipment needs to be calibrated further to where performance is optimal once again. Whereas if you worked with multiple companies, there is a chance of miscommunication and subpar calibration results.
Any time you need to have measuring devices tested to see if they're performing accurately, your best option is to work with a metrology lab such as at a place like Applied Calibration Services. They can test and then calibrate this equipment effectively if necessary. Just make sure you take the right steps when working with one.